Filter
Top Products
Using the ATM and VLAN Assistants 3-17
VLAN Aliases and Colors Configuration Assistant
The VLAN Aliases and Colors Assistant is used to setup the VLAN aliases
and colors.
To launch the VLAN Aliases and Colors Assistant:
1 From the Root window, select the Virtual LAN icon.
2 Select Configuration Assistant from the ATMvLAN menu. See
“Configuring VLAN Aliases and Colors” on page 4-21 for a more detailed
description.
Graph Assistants To use the graph assistants you select the network component and then
select ATMvLAN -> Graph Assistant.Graph assistants display the statistics
of the selected component.
Path Assistants If you want to see the path between two devices or between network
components, select the devices and then select the Path icon.
LE Path Assistant The LE Path Assistant allows you to select any two LE Clients or two
Ethernet segments to obtain the following information:
■ Address resolution through the LE Server
■ Control distributed path (direct)
■ Multicast forward addressing through the BUS