Filter
Top Products
5-12 CHAPTER 5: NETWORK MODIFICATION TASKS
VLAN server is deployed in the network. This policy is not supported in
this release.
■ IP Subnet based automatic VLAN configuration policy
Segments or devices assigned to this policy will automatically be
configured into various VLANs based on a predefined IP Subnet
address to VLAN mapping. A parameter database called Subnet Vdb
must be created and setup using the Locator Tool prior to using this
policy. This policy can only be applied to CoreBuilder 7x00-series
interface cards and SuperStack II Switch 2700 ports in this release.
■ Null Policy
This policy is used for removing segments and devices from assigned
policies. Once segments or devices are placed in the Null Policy, the
original policy is no longer enforced on that device or segment.
Performing
Policy-based VLAN
Moves
ATM and VLAN Policies Map
The ATM and VLAN Policies Map, see Figure 5-5, is used for managing
the logical connectivity of end-users or segments through Virtual LANs
based on predefined policies.
The ATM and VLAN Policies Map displays a
set of policies and the segments or devices assigned to each policy.
Each policy icon represents a predefined policy to which various segments
and devices in the network may be assigned. Once a segment or a device
is assigned to a policy via a simple move mechanism, the device