Filter
Top Products
5-14 CHAPTER 5: NETWORK MODIFICATION TASKS
Manual LECS
Database
Modification
The Manual LANE Redundancy Configuration Assistant is used for
manually modifying a specific LECS database, to enable a backup LES, or
to re-enable a primary LES when the backup is enabled. This
configuration assistant allows the operator to manage manual LANE
redundancy.
The failed LES is located according to its address by scrolling the ELAN IDs
window and the backup LES is activated by clicking on its radio button.
Manually Modifying LANE Redundancy
You can modify the database of an LECS that was not automatically
changed by the LANE monitor using the Manual LANE redundancy
Assistant.
To modify the database:
1 From the LAN Emulation window or Topology Browser select the
Backbone and Service icon or branch.
2 From the ATMvLAN menu select Zoom Physical. The Backbone and
Services window is displayed.
3 Select the LECS which contains the database you want to modify.
4 Select the Configure Assistant option from the ATMvLAN menu. The
Manual LANE Redundancy window is displayed. See Figure 5-6.
Figure 5-6 The Backbone and Services Configuration Assistant/Manual LANE
Redundancy