Filter
Top Products
Measuring Network -wide ATM Traffic Performance Using the Bandwidth Icon 7-3
To select a switch for display on the active NNIx Map
1 Click on the ATM Switch entry in the NNIx Browser.
2 Click on the Show (plus) icon.
To select a switch hierarchy for display on the active NNIx map
1 Click on the ATM Switch entry in the NNIx Browser.
2 Click on the Show Subtree (double plus) icon.
Once the switches are added to the NNIx map, data collection starts
automatically.
To delete nodes from the NNIX Map:
SIn the NNIx Browser, select the node and then select the “-” icon
or
in the NNIx Map, select the nodes and then select Map -> Delete Node.
Select Map -> Clear All to clear all the nodes from the Map.
NNIx Map The NNIx Maps display the traffic patterns on the ATM switches. Each
NNIx map is given a unique consecutive number. After you close a map,
and open a new map, the map receives the first available number of the
map that was closed. For example, Maps 1, 2 and 3 are created. Map 2 is
closed. The new map will receive the number 2.
Figure 7-2 NNIx Map