Filter
Top Products
7-12 CHAPTER 7: NETWORK PERFORMANCE MEASUREMENT TASKS
Toggle legend: Clicking the middle mouse button while the cursor is
located inside the history graph will cause the legend to be hidden and
the graph to be widened. The widened display contains the same
information but is now easier to read. Another click on the middle mouse
button restores the original state.
Individual sample display: Clicking the right mouse button while the
cursor is located inside the history graph will enter the individual sample
display mode. This mode is indicated by the appearance of a cross-hair
cursor.
Position the cross-hairs at a desired point on the history graph and click
on the left mouse button. The detailed information about this sample
point will be displayed on the lower left corner of the graph. This
information includes sample number, sample time, sample graph and
sample value.
Clicking on the right mouse button while in the individual sample display
mode to return to the normal display mode.
Displaying Statistics To display statistics:
1 Select a network element in the management maps or, in the
Component View of the Topology Browser, select a network element
component.
2 Select Graph Assistant from the ATMvLAN menu.
The CoreBuilder performance statistics window is displayed as in
Figure 7-11.