Filter
Top Products
4-22 CHAPTER 4: NETWORK CONFIGURATION TASKS
The following steps listed below illustrate the VLAN alias and color setup.
This procedure is common for both ATM-based VLANs as well as
non-ATM VLAN alias setup.
1 From the Root window select the Virtual LANs icon and then from the
ATMvLAN menu select Configuration Assistant
or
in the Topology Browser select a Virtual LANs component and then select
the Configure icon.
The Virtual LANs VLAN Configuration Assistant for the VLAN Aliases and
Colors dialog box is displayed as in Figure 4-6. For ATM-based VLANs the
VLAN ID is the ELAN ID; for non ATM-based VLANs, the VLAN ID is the
Work Group number.
For CoreBuilder 2500/6000 VLANs, the VLAN ID is the VLAN name given
by the user.
Figure 4-6 Virtual LANs Configuration Assistant for Aliases and Colors
The VLAN Names field lists all the VLANs that have been defined in the
NMS.
2 Select a VLAN ID from the VLAN ID cascade and enter a user-friendly
name in the entry field.
3 Select a color using the color option button.
4 Click Add.
The name is added to the list.