Filter
Top Products
4-56 CHAPTER 4: NETWORK CONFIGURATION TASKS
To access the window:
■ From a CoreBuilder.x.x.x.x, select Switch Board Module and then with
the device view displayed, select Configuration Assistant from the
ATMvLAN menu.
The Module Parameters are:
The Module Status is:
Table 4-22 Module Parameters
Parameters Meaning
Location Module slot number starting from 1.
Counting starts at the upper-most module.
Type An authoritative identification of the type of
physical Module in this physical location.
(Switch Board).
S/W Version A textual description of the version/revision
for this Module’s software.
H/W Version A textual description of the version/revision
for this Module’s hardware.
Serial The serial number of the physical Module
present in this physical location.
Table 4-23 Module Status
Status Meaning Values
Admin Status The desired state of the
module.
None
Enabled
Disabled
Reset
Load
Test
Oper Status The current operational
state of the module.
Other
Invalid
Test
Oper
Reset
Warning
nonFatalError
fatalError
Table 4-24 Window Actions:
To: Select: Click:
Change administration status of
module
Admin Status option menu Apply