Filter
Top Products
Configuring LAN Emulation Services 4-17
To configure the NMS:
1 Connect the NMS to port 1 on one of the 2700s.
2 Ping all the devices. Be certain that both the CoreBuilder 7000
management ports are connected to the bridge 0 ports on the 2700s.
Make sure they appear in the HPOV IP map.
3 Run the ATMvLAN application.
Make sure all that all the devices appear in the ATM Devices Map and
that the LES/BUSs from both the CoreBuilders appear in the LAN
Emulation Backbone and Services map.
Be certain that there are segments in the admin VLAN, they will appear as
VN-ELANxxx_0, and in the 2nd VLAN (bridge 1 VLAN) in the VLAN Map.
Only two VLAN icons appear green, the rest appear brown indicating that
they are empty.