Filter
Top Products
System Messages B-7
Backbone Services Configuration:
SNMP SET error - [SNMP status] - for
CoreBuilder - [device IP address].
CoreBuilder skipped.
error None
Backbone Services Configuration:
LECS DB is not synchronized. Make
sure to synchronize it using this
window.
warning Synchronize the DB.
Backbone Services Configuration:
SNMP GET error - [SNMP status] - for
LECS - [device IP address]. Operation
aborted.
error None
VLAN Creation: Must enter VLAN ID.
Operation stopped.
warning Re-enter VLAN ID.
VLAN Creation: No blanks allowed in
VLAN ID. Operation stopped.
warning Re-enter VLAN ID.
VLAN Creation: [network number]
must be a valid IP Address. Operation
aborted.
error Re-enter network number.
VLAN Creation: [network mask] must
be a valid IP Address. Operation
aborted.
error Re-enter network mask.
VLAN Server: VLAN Server is not
defined. Use "VLAN Server Setup” to
define it.
warning Define the VLAN Server IP
address and try again.
VLAN Server: SNMP GET error - [SNMP
status] - in Server - [device IP address].
Operation aborted.
error None
LECS Configuration: LECS is not
enabled. Operation aborted.
error None
LECS Operation: SNMP GET error -
[SNMP status] - for LECS - [device IP
address] Operation aborted.
error None
LECS Operation: Cannot find LES ATM
address for alias - [alias]. Operation
aborted.
error Reset the LECS CoreBuilder to
the factory default and restart
the operation.
LECS Operation: Cannot find ELAN ID
for alias - [alias]. Changing [alias] to
[first ELAN in the list].
warning None
MEDP is not running error Start the MEDP Poller. Select
Start-> Programs-> Transcend
ATMvLAN -> ATMVLAN Poller.
Table B-1 System Messages
Message Type Meaning Action