Filter
Top Products
5-2 CHAPTER 5: NETWORK MODIFICATION TASKS
Several methods are provided for moving Ethernet segments between
VLANs. They are detailed in the following sections.
■ Using the VLAN Move Operation
■ Drag-and-Drop Ethernet Segments Between VLAN Windows.
■ For the SuperStack II Switch 2700 or CoreBuilder with 7x00 card, see
Drag-and-Drop on Front Panel Window.
■ Automatic VLAN Moves Based on Policies.
■ Moving Ports Between Protocol-based VLANs.
The first two methods work on all VLAN types; the others apply to
specific types of VLANs as denoted. With the first method you can
“aggregate” segments to move many segments at once and you can
move segments to different VLANs at the same time. The second and
third methods are more intuitive and are quicker for moving individual
segments.
Using the VLAN Move Operation
To use the VLAN Move operation:
1 Select the Ethernet segments to be moved in either the VLAN-name
window or the LANE User window.
2 Select the destination VLAN in the Virtual LANs window and then from
the ATMvLAN menu select ATMvLAN Move.
You can locate the Ethernet segment icons by stepping down through
windows. Alternatively, if the segment label is known to you, you can use
the HPOV Locate option. see “Locating Ethernet Segments Using the
HPOV Locate Option” on page 5-6.