Filter
Top Products
B-4 APPENDIX B: TROUBLESHOOTING
ATMvLAN Devices Configuration:
Invalid IP address
error Change IP address.
ATMvLAN Devices Configuration:
Invalid Community string
error Change Community string.
VirtualLANs Configuration: No VLAN
IDs found. Operation aborted.
error Application needs LAN
Emulation Services (LES) and
they are not defined on the
Network
Enable at least one LES and
then try again
VirtualLANs Configuration: Cannot
open file VnRgb for writing:
permission denied. Operation aborted.
error Change file writing
permissions.
VirtualLANs Configuration: No blanks
allowed in VLAN name. The VLAN will
be [truncated name].
warning Re-enter VLAN name.
VirtualLANs Configuration: VLAN must
have its VLAN ID as one its names.
Name not deleted.
warning
VLAN Move: Trying to move LEC
segment - [segment number] - to
WorkGroup - [WorkGroup]. Segment
skipped
warning Select a different VLAN.
VLAN Move: Trying to move
WorkGroup segment - [segment
number]- to - ELAN/[VLAN]. Segment
skipped.
warning Select a different VLAN.
VLAN Move: Select segments from
one device only. Operation aborted.
error You cannot create a local
VLAN on more than one
device in one action. Use a
separate Move command for
each device.
VLAN Move: Operation completed
successfully for device - [device IP
address]
info None
VLAN Move: No P2C found in device -
[device IP address]. Device skipped.
error Check the P2C card.
VLAN Move: SNMP GET error - [SNMP
status]- in device -[device IP address].
Device skipped.
error Wait for the ATMVLAN maps
to refresh. Check the VLAN
maps for results of the
previous operation and then
retry.
Table B-1 System Messages
Message Type Meaning Action