Filter
Top Products
Configuring and Using the MACvDB 4-31
A warning message appears.
Figure 4-9 The Locator Tool/MACvDB Tab
Apply the MAC-based
VLAN
Auto-configuration
to the Devices
To apply the MAC-based auto-configuration policy to the devices you
have to move the devices into the MAC-based policy.
To move the devices into the MAC-based policy:
1 Select the edge device in the ATMvLAN Devices map
2 Select the MacBaseVlanPolicy icon in the ATMvLAN Policies map and then
select the VLAN Move icon or the Move option from the ATMvLAN menu.
The policy icon turns yellow, indicating that there are devices in the policy.
To remove a device from a policy:
1 Select the device in the policy map and then select the NullPolicy icon.
2 Select the Move icon or the Move option from the ATMvLAN menu.