Filter
Top Products
20-10
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show callhome
show callhome
To display related Call Home information configured on a switch, use the show callhome command.
show callhome [destination-profile {profile | full-txt-destination | short-txt-destination |
XML-destination} | transport-email]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays configured callhome information.
switch# show callhome
callhome enabled
Callhome Information:
contact person name:who@where
contact person's email:person@place.com
contact person's phone number:310-408-4000
street addr:1234 Picaboo Street, Any city, Any state, 12345
site id:Site1ManhattanNewYork
customer id:Customer1234
contract id:Andiamo1234
switch priority:0
The following example displays destination profile information.
switch# show callhome destination-profile
XML destination profile information
maximum message size:250000
email addresses configured:
findout@.cisco.com
Short-txt destination profile information
maximum message size:4000
destination-profile Displays Call Home destination profile information for the specified
profile.
profile Specifies a profile name. Maximum length is 32 characters.
full-txt-destination Specifies the full-txt-destination destination profile.
short-txt-destination Specifies the short-txt-destination destination profile.
XML-destination Specifies the XML-destination destination profile.
transport-email Displays Call Home e-mail transport information.