Filter
Top Products
20-35
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fcdroplatency
show fcdroplatency
To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
show fcdroplatency [network | switch]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays the configured Fibre Channel latency parameters.
switch# show fcdroplatency
switch latency value:4000 milliseconds
network latency value:5000 milliseconds
network Network latency in milliseconds.
switch Switch latency in milliseconds.