Filter
Top Products
20-188
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show wwn
show wwn
To display the status of the WWN configuration, use the show wwn commands.
show wwn {status block-id number | switch}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays the WWN of the switch.
switch# show wwn switch
Switch WWN is 20:01:ac:16:5e:52:00:01
status block-id number Displays WWN usage and alarm status for a block ID. The range is 34 to
1793.
switch Displays switch WWN.