Filter
Top Products
20-44
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fcroute
show fcroute
Use the show fcroute command to view specific information about existing Fibre Channel and FSPF
configurations.
show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id]
| summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are
included in the total number of routes.
Examples The following example displays administrative distance.
switch# show fcroute distance
Route
UUID Distance Name
---- -------- ----
10 20 RIB
22 40 FCDOMAIN
39 80 RIB-CONFIG
12 100 FSPF
17 120 FLOGI
21 140 TLPM
14 180 MCAST
64 200 RIB-TEST
distance Displays FC route preference.
label Displays label routes.
multicast Displays FC multicast routes.
summary Displays FC routes summary.
unicast Displays FC unicast routes.
vsan vsan-id The ID of the VSAN (from 1 to 4093).
fcid-id The Fibre Channel ID.