Filter
Top Products
20-177
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show trunk protocol
show trunk protocol
To display trunk protocol status, use the show trunk protocol command.
show trunk protocol
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays trunk protocol status.
switch# show trunk protocol
Trunk protocol is enabled