Filter
Top Products
20-37
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fcfwd
show fcfwd
To display the configured fcfwd tables and statistics, use the show fcfwd command.
show fcfwd {idxmap [interface-toport | port-to-interface | statistics] | pcmap [interface] | sfib
[multicast | statistics | unicast] | spanmap [rx | tx]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays fcfwd SPAN map receive information.
switch# show fcfwd spanmap rx
SPAN source information: size [c8]
dir source vsan bit drop_thresh destination
idxmap Displays FC forward index tables.
interface-to-port Displays interface index to port index table.
port-to-interface Displays port index to interface index table.
statistics Displays index table statistics.
pcmap Displays FC forward PortChannel table.
interface Displays PortChannel table for an interface.
sfib Displays software forwarding tables.
multicast Displays multicast software forwarding tables.
statistics Displays software forwarding statistics.
unicast Displays unicast software forwarding tables.
spanmap Displays SPAN map tables.
rx Displays SPAN map table in ingress -rx direction.
tx Displays SPAN map table in egress -tx direction.