Filter
Top Products
20-69
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show hardware
show hardware
To display switch hardware inventory details, use the show hardware command.
show hardware [ipc-channel status]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.2(1).
Usage Guidelines None.
Examples
switch# show hardware
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support:http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc. All rights reserved.
The copyright for certain works contained herein are owned by
Andiamo Systems, Inc. and/or other third parties and are used and
distributed under license.
Software
BIOS: version 0.0.0
loader: version 1.0(0.259)
kickstart:version 1.0(2) [build 1.0(0.280)]
system: version 1.0(2) [build 1.0(0.280)]
BIOS compile time: 10/10/02
kickstart image file is:bootflash:/boot-280
kickstart compile time: 11/20/2002 6:00:00
system image file is: isan-280
system compile time: 11/20/2002 6:00:00
Hardware
RAM 963108 kB
bootflash:503808 blocks (block size 512b)
slot0: 0 blocks (block size 512b)
172.22.92.28 uptime is 0 days 0 hour 31 minute(s) 23 second(s)
Last reset
Reason:Watchdog Timeout/External Reset
System version:1.0(2)
ipc-channel status Displays the status of the interprocess communication (IPC) channels.