Filter
Top Products
20-125
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show port-channel
The following example displays the PortChannel database.
switch# show port-channel database
port-channel 2
Administrative channel mode is on
Operational channel mode is on
Last membership update succeeded
First operational port is fc2/2
1 port in total, 1 port up
Ports: fc2/2 [up]
The show port-channel consistency command has two options—without detail and detail.
Command Without Details
switch# show port-channel consistency
Database is consistent
switch#
Command With Details
switch# show port-channel consistency detail
Authoritative port-channel database:
================================================
totally 1 port-channels
port-channel 2:
1 ports, first operational port is fc2/2
fc2/2 [up]
================================================
database 1: from module 5
================================================
totally 1 port-channels
port-channel 2:
1 ports, first operational port is fc2/2
fc2/2 [up]
================================================
database 2: from module 2
================================================
totally 1 port-channels
port-channel 2:
1 ports, first operational port is fc2/2
fc2/2 [up]
================================================
The show port-channel usage command displays details of the used and unused PortChannel numbers.
PortChannel Usage
switch# show port-channel usage
Totally 2 port-channel numbers used
====================================
Used : 3, 9
Unused: 1-2, 4-8, 10-128