Filter
Top Products
20-189
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show zone
show zone
To display zone information, use the show zone command.
show zone
[active [vsan vsan-id] |
ess [vsan vsan-id] |
member {fcalias alias-name | fcid fcid-id [lun lun-id ] | pwwn wwn [lun lun-id ]} [active | vsan
vsan-id] |
name string [active] [vsan vsan-id] |
statistics [lun-zoning [vsan vsan-id] | read-only-zoning [vsan vsan-id] | vsan vsan-id] |
status [vsan vsan-range]
vsan [vsan vsan-id]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was modified in Cisco MDS SAN-OS Release 1.3(4).
Usage Guidelines None.
Examples The following example displays configured zone information.
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
fwwn 20:41:00:05:30:00:2a:1e
fwwn 20:42:00:05:30:00:2a:1e
fwwn 20:43:00:05:30:00:2a:1e
active Displays zones which are part of active zoneset.
ess Displays ESS information.
member Displays all zones in which the given member is part of.
name Displays members of a specified zone.
statistics Displays zone server statistics.
status Displays zone server current status.
vsan vsan-id Displays zones belonging to the specified VSAN ID. The range is 1 to 4093.
lun lun-id Specifies a LUN ID.
lun-zoning Displays LUN zoning related statistics
read-only-zoning Displays read-only zoning related statistics