Filter
Top Products
20-73
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show install all impact
show install all impact
To display the software compatibility matrix of a specific image, use the show install all impact
command.
show install all impact [asm-sfn image-filename] [kickstart image-filename] [ssi image-filename]
[system image-filename]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.2(1).
Usage Guidelines None.
Examples Use the show install all impact command to view the effect of updating the system from the running
image to another specified image.
switch# show install all impact
Verifying image bootflash:/ilc1.bin
[####################] 100% -- SUCCESS
Verifying image bootflash:/vk73a
[####################] 100% -- SUCCESS
Verifying image bootflash:/vs73a
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting “system” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting “kickstart” version from image bootflash:/vk73a.
asm-sfn Specifies the ASM SFN boot variable.
kickstart Specifies the kickstart boot variable.
ssi Specifies the SSI boot variable.
system Specifies the system boot variable.
image-filename The name of an image.