Filter
Top Products
20-121
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show module
Use the uptime option to display the time that a specified supervisor module, switching module, or
services module is functional in the switch. This time is computed from the time a module goes online
after a disruptive upgrade or reset.
Examples The following example displays information about the modules on the switch.
switch# show module
Mod Ports Module-Type Model Status
--- ----- ------------------------------- ------------------ ------------
2 32 Advanced Services Module DS-X9032-SMV powered-dn
4 32 Advanced Services Module DS-X9032-SMV powered-dn
5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active *
6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 ha-standby
8 32 1/2 Gbps FC Module DS-X9032 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- ----------- ------ --------------------------------------------------
5 1.2(2) 0.610 --
6 1.2(2) 0.610 --
8 1.2(2) 0.3 21:c1:00:0b:46:79:f1:40 to 21:e0:00:0b:46:79:f1:40
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
5 00-d0-97-38-b4-01 to 00-d0-97-38-b4-05 JAB06350B0H
6 00-d0-97-38-b3-f9 to 00-d0-97-38-b3-fd JAB06350B1R
8 00-05-30-00-2b-e2 to 00-05-30-00-2b-e6 jab062407x4
* this terminal session
The following example displays diagnostic information about the modules on the switch.
switch# show module diag
Diag status for module 2 (. = PASS, F = FAIL, N = N/A)
CPU .
SPROM .
ASICS .
Diag status for module 4 (. = PASS, F = FAIL, N = N/A)
CPU .
SPROM .
ASICS .
The following example displays uptime information about the modules on the switch.
switch# show module uptime
------ Module 1 -----
Module Start Time: Wed Apr 14 18:12:48 2004
Up Time: 16 days, 5 hours, 59 minutes, 41 seconds
------ Module 6 -----
Module Start Time: Wed Apr 14 18:11:57 2004
Up Time: 16 days, 6 hours, 0 minutes, 32 seconds
HA-standby
This module is the standby supervisor module and that the HA switchover
mechanism is enabled.
standby
This module is the standby supervisor module.
show module Output Description