Filter
Top Products
20-58
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show ficon
Examples The following example displays configured FICON information
switch# show ficon
Ficon information for VSAN 20
Ficon is online
VSAN is active
Host port control is Enabled
Host offline control is Enabled
User alert mode is Enabled
SNMP port control is Enabled
Host set director timestamp is Enabled
Active=Saved is Disabled
Number of implemented ports are 240
Key Counter is 73723
FCID last byte is 0
Date/Time is set by host to Sun Jun 26 00:04:06.991999 1904
Device allegiance is locked by Host
Codepage is us-canada
Saved configuration files
IPL
_TSIRN00
The following example displays port address information
switch# show ficon vsan 2 portaddress
Port Address 1 is not installed in vsan 2
Port number is 1, Interface is fc1/1
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
Port Address 2 is not installed in vsan 2
Port number is 2, Interface is fc1/2
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
...
Port Address 239 is not installed in vsan 2
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
Port Address 240 is not installed in vsan 2
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
The following example displays port address information in a brief format.
switch# show ficon vsan 2 portaddress 50-55 brief
-------------------------------------------------------------------------------
Port Port Interface Admin Status Oper FCID
Address Number Blocked Mode
-------------------------------------------------------------------------------
50 50 fc2/18 on fcotAbsent -- --
51 51 fc2/19 off fcotAbsent -- --
52 52 fc2/20 off fcotAbsent -- --
53 53 fc2/21 off fcotAbsent -- --
54 54 fc2/22 off notConnected -- --
55 55 fc2/23 off up FL 0xea0000
56 55 off up FL 0xea0000