Filter
Top Products
20-75
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show install all status
show install all status
To display the on-going install all command status or the log of the last installed install all command
from a Console, SSH, or Telnet session, use the show install all status command.
show install all status
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.3(1).
Usage Guidelines This command only displays the status of an install all command that is issued form the CLI (not the
Fabric Manager).
Examples Use the show install all status command to view the output of a install all command process.
switch# show install all status
There is an on-going installation... <---------------------- in progress installation
Enter Ctrl-C to go back to the prompt.
Verifying image bootflash:/b-1.3.0.104
-- SUCCESS
Verifying image bootflash:/i-1.3.0.104
-- SUCCESS
Extracting “system” version from image bootflash:/i-1.3.0.104.
-- SUCCESS
Extracting “kickstart” version from image bootflash:/b-1.3.0.104.
-- SUCCESS
Extracting “loader” version from image bootflash:/b-1.3.0.104.
-- SUCCESS
switch# show install all status
This is the log of last installation. <<<<<< log of last install