Filter
Top Products
20-31
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fcanalyzer
show fcanalyzer
To display the list of hosts configured for a remote capture, use the show fcanalyzer command.
show fcanalyzer
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines The
DEFAULT keyword shown with an ActiveClient entry specifies that the default port is used in
attempting the connection to the client.
Examples Displays Configured Hosts
switch# show fcanalyzer
PassiveClient = 10.21.0.3
PassiveClient = 10.21.0.3
ActiveClient = 10.21.0.3, DEFAULT