Filter
Top Products
20-95
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show iscsi initiator
show iscsi initiator
To display information about all the iSCSI nodes that are remote to the switch, use the show iscsi
initiator command.
show iscsi initiator [configured [initiator-name] | detail | fcp-session [detail] | iscsi-session
[detail] | summary [name] ]
Syntax Description
Defaults None.
Command Modes EXEC
Command History This command was introduced in Cisco MDS SAN-OS Release 1.1(1).
Usage Guidelines If no parameter is provided the command lists all the active iSCSI initiators. If the iSCSI node name is
provided then the command lists the details of that iSCSI initiator.
Examples The following example displays all iSCSI initiators.
switch# show iscsi initiator
iSCSI Node name is iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8
iSCSI alias name: iscsi7-lnx
Node WWN is 23:10:00:05:30:00:7e:a0 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 23:12:00:05:30:00:7e:a0 (dynamic)
Interface iSCSI 8/3, Portal group tag: 0x382
VSAN ID 1, FCID 0xdc0100
iSCSI Node name is iqn.1987-05.com.cisco:02.91b0ee2e8aa1.iscsi16-w2k
iSCSI alias name: ISCSI16-W2K
Node WWN is 23:1f:00:05:30:00:7e:a0 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 23:28:00:05:30:00:7e:a0 (dynamic)
Interface iSCSI 8/3, Portal group tag: 0x382
VSAN ID 1, FCID 0xdc0101
configured Displays the configured information for the iSCSI initiator.
initiator-name Specifies the name of an initiator.
detail Displays detailed iSCSI initiator information.
fcp-session Displays the Fibre Channel session details.
iscsi-session Displays iSCSI session details.
summary Displays summary information.
name Displays initiator name information.