Filter
Top Products
20-9
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show boot auto-copy
show boot auto-copy
To display state of the auto-copy feature, use the show boot auto-copy command.
show boot auto-copy [list]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.2(1).
Usage Guidelines None.
Examples The following example displays the current state of the auto-copy feature.
switch# show boot auto-copy
Boot variables Auto-Copy ON
The following example displays the ilc1.bin image being copied to the standby supervisor module's
bootflash, and once this is successful, the next file will be lasilc1.bin. This command only displays files
on the active supervisor module.
switch# show boot auto-copy list
File: /bootflash/ilc1.bin
Bootvar: ilce
File:/bootflash/lasilc1.bin
Bootvar: lasilc
The following example displays a typical message when the auto-copy option is disabled or if no files
are copied.
switch# show boot auto-copy list
No file currently being auto-copied
list Displays the list of files to be auto-copied