Filter
Top Products
20-152
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show sprom
show sprom
To display vendor ID, product component attributes, serial number information that can be used to track
field replacable units, use the show sprom command.
show sprom {backplane backplane-index |
clock clock-module-index |
fan |
mgmt-module |
module module-number sprom-index |
powersupply powersupply-index |
sup}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines Use the show sprom command to get unique information about a specific module, supervisor module,
switch, power-supply module, or a fan module. If the customer needs to report a problem with a module,
supervisor module, switch, power-supply module, or a fan module and does not have access to
management station, then he can extract serial number information from show sprom.
backplane
backplane-index
Display attributes that can be used to uniquely identify a switch. The range
is 1 to 2.
clock
clock-module-index
Display attributes of the clock module. There are two clock modules in a
switch. This module is absent in MDS9216 type switch. The range is 1 to 2.
fan Display attributes that uniquely identified fan.
mgmt-module Display attributes of management module. This module is only present in
MDS9216 type switch.
module module-number
sprom-index
Display Vendor ID, product's component attributes for the given switching
module. There can be up to 4 sub-components in a module. Each of them
will have a SPROM associated with it.
powersupply
powersupply-index
Displays attributes of the first or the second power-supply. This contains
information about the powersupply capacity in watts when it is used in
110Volts and 220Volts respectively. This information is used for
power-budget allocation. The range is 1 to 2.
sup Display Vendor ID, product's component attributes for the current
supervisor module