Filter
Top Products
20-124
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show port-channel
show port-channel
Use the show port-channel command to view information about existing PortChannel configurations
show port-channel {compatibility-parameters | consistency [detail] | database [interface
port-channel port-channel-number] | summary | usage}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays the PortChannel summary.
switch# show port-channel summary
NEW
The following example displays the PortChannel compatibility.
switch# show port-channel compatibility-parameters
physical port layer fibre channel or ethernet
port mode E/TE/AUTO only
trunk mode
speed
port VSAN
port allowed VSAN list
compatibility-parameters Displays compatibility parameters.
consistency Displays the database consistency information of all modules.
detail Displays detailed database consistency information.
database Displays PortChannel database information.
interface port-channel
port-channel-number
Specifies the PortChannel number. The range is 1 to 128.
summary Displays PortChannel summary.
usage Displays PortChannel number usage.