Filter
Top Products
20-165
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show system health
show system health
To display configured Online System Health Management (OSHM) information, use the show system
health command.
show system health [module slot | statistics [loopback [interface {fc slot/port| iscsi slot/port} |
module slot [timelog] | timelog] | module slot]
Syntax Description
Defaults None
Command Modes EXEC mode
Command History This command was introduced in Cisco MDS SAN-OS Release 1.3(4).
Usage Guidelines None.
Examples The following example displays the current health of all modules in the switch.
switch# show system health
Current health information for module 2.
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 5 Sec Running Enabled
EOBC 5 Sec Running Enabled
Loopback 5 Sec Running Enabled
-----------------------------------------------------------------
Current health information for module 6.
Test Frequency Status Action
-----------------------------------------------------------------
InBand 5 Sec Running Enabled
Bootflash 5 Sec Running Enabled
EOBC 5 Sec Running Enabled
Management Port 5 Sec Running Enabled
-----------------------------------------------------------------
module slot Displays information for a module in the switch,
statistics Displays OHMS statistics.
interface Specifies the required interface.
fc slot/port Specifies the Fiber Channel interface at the specified slot and port.
iscsi slot/port Specifies the iSCSI interface at the specified slot and port.
loopback Displays the OHMS loopback test statistics.
timelog Displays the loopback round trip times.