Filter
Top Products
20-66
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fspf
show fspf
To display global FSPF information, use the show fspf command. This information includes:
• the domain number of the switch
• the autonomous region for the switch
• Min_LS_arrival: the minimum time that must elapse before the switch accepts LSR updates
• Min_LS_interval: the minimum time that must elapse before the switch can transmit an LSR
• LS_refresh_time: the interval lapse between refresh LSR transmissions
• Max_age: the maximum time aa LSR can stay before being deleted
show fspf [database [vsan vsan-id [domain domain-id] [detail]] | interface | vsan vsan-id
[interface [interface-range]]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples
switch# show fspf vsan 1 interface fc 2/14
FSPF interface fc2/14 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
database To display information of fspf database for a VSAN. If no other parameters
are given all the LSRs in the database are displayed. If more specific
information is required then the domain number of the owner of the LSR
may be given. Detail gives more detailed information on each LSR.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
domain domain-id The domain of the database. The parameter domain_num is unsigned
integers in the range 0-255.
detail Displays detailed FSPF information for the VSAN.
interface interface-range Display FSPF interface information for a given VSAN. If the interface
number is specified information on the neighbor on that interface is
displayed. If no interface is specified information on all interfaces are
displayed. The parameter interface-range is of the format fcslot/port -
fcslot/port.