Filter
Top Products
20-115
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show logging
show logging
To display the current system message logging configuration, use the show logging command.
show logging [console | level [auth | authpriv | callhome | cron | daemon | ftp | kernel | localn |lpr
| mail | news | security | syslog | user | uucp | vsan] | info | last lines | logfile | module | monitor
| nvram | server servername]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays current system message logging.
switch# show logging
Logging console: enabled (Severity: notifications)
Logging monitor: enabled (Severity: information)
Logging linecard: enabled (Severity: debugging)
Logging server: enabled
{172.22.0.0}
server severity: debugging
server facility: local7
{172.22.0.0}
server severity: debugging
server facility: local7
Logging logfile: enabled
Name - external/sampleLogFile: Severity - notifications Size - 3000000
console Displays console logging configuration.
info Displays logging configuration.
last Displays last few lines of logfile.
level Displays last few lines of logfile.
logfile Displays contents of logfile.
module Displays module logging configuration.
monitor Displays monitor logging configuration.
nvram Displays NVRAM log.
server servername Displays server logging configuration.