Filter
Top Products
20-162
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show system
show system
To display the system information, use the show system command.
show system {cores | default switchport | directory information | error-id {hex-id | list} |
exception-info | pss shrink status [details] | redundancy status | reset-reason [module slot]
| resources | uptime}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines Use the show system redundancy status command to ensure that the system is ready to accept a
switchover.
cores Displays core transfer option.
default switchport Displays system default values.
directory information Directory information of System Manager.
error-id Displays description about errors.
hex-id Specifies the error ID in hexadecimal format. The range is 0x0 to 0xffffffff.
list Specifies all error IDs.
exception-info Displays last exception log information.
pss shrink status Displays the last PSS shrink status.
details Displays detailed information on the last PSS shrink status.
redundancy status Redundancy status.
reset-reason Displays the last four reset reason codes.
module slot Specifies the module number to display the reset-reason codes.
resources Show the CPU and memory statistics.
uptime Displays how long the system has been up and running.