Filter
Top Products
20-183
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show vrrp
show vrrp
To display the VRRP configuration information, use the show vrrp command.
show vrrp [statistics | vr group [interface type]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays VRRP configured information.
switch# show vrrp vr 7 interface vsan 2 configuration
vr id 7 configuration
admin state down
priority 100
no authentication
advertisement-Interval 1
preempt yes
tracking interface vsan1 priority 2
protocol IP
The following example displays VRRP status information.
switch# show vrrp vr 7 interface vsan 2 status
vr id 7 status
MAC address 00:00:5e:00:01:07
Operational state: init
statistics Displays cumulative vrrp statistics for this machine.
vr Displays virtual router information.
group Specifies the group ID. The range is 1 to 255.
interface type Enter mgmt 0 for management interface, or VSAN for the IPFC VSAN
interface.