Filter
Top Products
20-173
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show telnet server
show telnet server
To display the state of the Telnet access configuration, use the show telnet server command.
show telnet server
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays the status of the Telnet server.
switch# show telnet server
telnet service enabled