Filter
Top Products
20-122
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show ntp
show ntp
To display the configured Network Time Protocol (NTP) server and peer associations, use the show ntp
command.
show ntp {peers | statistics [io | local | memory | peer {ipaddr ip-address | name peer-name}] |
timestamp-status}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
peers Displays all the peers.
statistics Displays the NTP statistics
io Displays the input/output statistics.
local Displays the counters maintained by the local NTP.
memory Displays the statistics counters related to memory code.
peer Displays the per-peer statistics counter of a peer.
ipaddr ip-address Displays the peer statistics for the specified IP address.
name peer-name Displays the peer statistics for the specified peer name.
timestamp-status Displays if the timestamp check is enabled.