Filter
Top Products
20-51
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show fcsp
show fcsp
To display the status of the Fibre Channel Security Protocol (FC-SP) configuration, use the show fcsp
commands.
show fcsp [asciiwwn ascii-wwn | dhchap [database] | interface fc slot/port [statistics | wwn] | fcip
interface-number [statistics | wwn]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.3(1).
Usage Guidelines None.
Examples The following example displays DHCHAP configurations in FC interfaces.
switch# show fcsp interface fc1/9
fc1/9:
fcsp authentication mode:SEC_MODE_ON
Status: Successfully authenticated
The following example displays DHCHAP statistics for a FC interfaces.
switch# show fcsp interface fc1/9 statistics
fc1/9:
fcsp authentication mode:SEC_MODE_ON
Status: Successfully authenticated
Statistics:
FC-SP Authentication Succeeded:5
FC-SP Authentication Failed:0
FC-SP Authentication Bypassed:0
asciiwwn ascii-wwn Displays the ASCII representation of the WWN used with AAA server.
dhchap Displays the DHCHAP hash algorithm status.
database Displays the contents of the local DHCHAP database.
interface Displays the FC-SP settings for a FC or FCIP interface.
fc slot/port Displays the Fibre Channel interface in the specified slot and port.
fcip interface-number Displays the description of the specified FCIP interface from 1 to 255.
statistics Displays the statistics for the specified interface.
wwn Displays the FC-SP identity of the other device.