Filter
Top Products
20-163
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show system
Examples The following example displays the system redundancy status.
switch# show system redundancy status
Redundancy mode
---------------
administrative: HA
operational: None
This supervisor (sup-2)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Other supervisor (sup-1)
------------------------
Redundancy state: Not present
The following example displays the default switch port states.
switch# show system default switchport
System default port state is down
System default trunk mode is on
The following example displays error information for a specified ID.
switch# show system error-id 0x401D0019
Error Facility: module
Error Description: Failed to stop Linecard Async Notification.
The following example displays the system health information.
switch# show system health
System Health Services iteration frequency 5 seconds
Active SUP arbiter is Working
Active SUP bootflash is Working
The following example displays the system reset information.
switch# show system reset reason
----- reset reason for module 6 -----
1) At 520267 usecs after Tue Aug 5 16:06:24 1980
Reason: Reset Requested by CLI command reload
Service:
Version: 1.2(0.73a)
2) At 653268 usecs after Tue Aug 5 15:35:24 1980
Reason: Reset Requested by CLI command reload
Service:
Version: 1.2(0.45c)
3) No time
Reason: Unknown
Service:
Version: 1.2(0.45c)
4) At 415855 usecs after Sat Aug 2 22:42:43 1980
Reason: Power down triggered due to major temperature alarm
Service:
Version: 1.2(0.45c)