Filter
Top Products
20-63
Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3
Chapter 20 Show Commands
show file
show file
To display the contents of a specified file in the file system, use the show file command.
show file filename [cksum | md5sum]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines None.
Examples The following example displays the contents of the test file that resides in the slot0 directory.
switch# show file slot0:test
config t
Int fc1/1
no shut
end
show int
The following example displays the contents of a file residing in the current directory.
switch# show file myfile
The following example displays the CRC checksum for a file.
switch# show file bootflash:vboot-1 cksum
838096258
The following example displays the MD5 checksum for a filey.
switch# show file bootflash:vboot-1 md5sum
3d8e05790155150734eb8639ce98a331
filename Specifes a filename.
cksum Displays CRC checksum for a file.
md5sum Displays MD5 checksum for a file.