Filter
Top Products
The standard shnder display shows a historical record of shnder
echoes. If required, you can display a live image of the bottom
structure and the sh directly below the transducer by using the
A-Scope feature. The width of the bottom covered by the A-Scope
is indicated at the bottom of the window. A-Scope provides a more
precise and easier to interpret indication of the target strength.
There are three A-Scope modes, as illustrated in the diagram below:
MODE 1
The A-scope
image is centred
in the window.
MODE 2
The left-hand side
of the Mode 1
image is expanded
to give a more
detailed view.
MODE 3
The A-scope
image angles
outward as
signal width
increases with
depth.
Enabling the Fishnder A-Scope Mode
From the shnder main screen:
1. Press the appropriate ADJUST... softkey.
2. For dual frequency screens, select FREQ1 or FREQ2 to select
which frequency display you wish to change.
3. Press the SELECT VIEW softkey.
4. Use the trackpad up/down to select A-SCOPE.
5. Press OK when complete.
Note: Enabling A-Scope mode automatically switches OFF
Bottom Lock and Zoom.
Bottom Lock
The Bottom Lock function applies a lter to atten the image of the
seabed and make any objects on or just above it easier to discern.
This feature is particularly useful for nding sh that feed close to
the bottom.
Bottom Lock is selected for individual shnder windows and
can replace or appear alongside the standard shnder image.
Adjusting the range of the bottom lock image allows you to view
more bottom details. You can also reposition the image on screen to
anywhere between the bottom of the window (0%) and the middle of
the window (50%) by using the Bottom Shift control.
156 C-Series Widescreen user reference