Filter
Top Products
6.7 Chart setup
The set up for your chart and its cartography can be changed from
the standard conguration to suit your particular needs.
Although you will probably only do this when you rst use the chart,
you may decide to make subsequent adjustments once you become
more familiar with the system. Any settings that you change are
retained even when you power off.
Selecting the chart setup menu
In the chart application:
1. Press the MENU button.
2. Using the trackpad, highlight the Chart Setup menu item.
3. Press right on the trackpad to enter the Chart Setup menu.
Chart setup menu options
The following table describes the various options in the Chart Setup
Menu for your multifunction display.
Menu item Description Options
Object Information Determines how further
information is accessed
for cartographic areas
and objects:
• OFF — Information
is displayed for a
cartographic object
when you move the
cursor over the object
and press the OK
button.
• ALL ON —
Information is
displayed for
cartographic objects
and areas when you
move the cursor over
an object or area.
• Points ON —
Information is
displayed for a
cartographic object
when you move the
cursorover theobject.
• OFF
• Points ON
• All ON (default)
Using the chart
53