Filter
Top Products
Menu Item Description Options
Shallow Depth Alarm
Value
If the Shallow Depth
Alarm is set to ON, an
alarm is triggered if the
depth drops below the
value you specify.
0002 ft to maximum
transducer range
Deep Depth Alarm Deep Depth Alarm
Switches the deep depth
alarm on or off. If a DSM
is not connected, this
cannot be set.
OFF, ON
Deep Depth AlarmValue
If the Deep Depth Alarm
is set to ON, an alarm
is triggered if the depth
exceeds the value that
you specify.
0002 ft to maximum
transducer range
12.9 Setting up your shnder
Opening the shnder setup menu
1. Make a shnder window active.
2. Press the MENU button.
3. Select Fishnder Setup from the list of options.
Fishnder setup menu options
This section describes the settings you can change using the
shnder setup menu. The setup menu contains settings that are
likely to be changed infrequently.
Menu Item Description Options
Congure Preset
Frequencies
Enables you to adjust
the frequencies used
for the four shnder
presets. For each
preset, you can select
AUTO for fully automatic
selection, or you can
manually specify the
frequency. You can
also reset all the
preset frequencies to
the factory defaults if
required.
AUTO or manual
frequencies.
Depth Digit Size Size of the digit that
indicates the depth.
• Small
• Medium
• Large
166 C-Series Widescreen user reference