Filter
Top Products
PowerLogic™ PM5500 series user manual Chapter 17—MID compliance
HRB1684301-01 143
Installing the terminal covers
The voltage and current terminal covers help prevent tampering with the meter’s
voltage and current measurement inputs. The terminal covers enclose the terminals,
the conductor fixing screws and a suitable length of the external conductors and their
insulation. The terminal covers are secured by tamper-resistant meter seals.
The meter terminal covers must be installed by a qualified installer. The installation of
both the voltage and current terminal covers is required to provide tamper evidence for
MID installations.
1. Install the voltage terminal cover (A) and apply the seal at the sealing point (B).
2. Install the current terminal cover (C) and apply the seals at the sealing points (D).
PM5561 default screen
The meter’s default home screen displays the following information.
Related topics
• See “Front panel display and meter setup” on page 31 for detailed information on
front panel menu navigation, LED indicators and display screen notification icons.
Location of terminal covers
A Voltage terminal cover
B Voltage terminal sealing point
C Current terminal cover
D Current terminal sealing points (2)
C
D
Default PM5561 display screen
A Accumulated real energy (delivered + received)
B System frequency
C Active tariff
D Power system setting
E Locked / unlocked icon
E
C
D