Filter
Top Products
PowerLogic™ PM5500 series user manual Chapter 2—Hardware reference
HRB1684301-01 19
Mounting the DIN rail mount model (PM5563)
The meter is designed to be mounted on a TS35 Top-Hat style DIN rail.
1. Line up the meter to the DIN rail. Tilt the meter slightly so the top notch is resting
securely on the DIN rail.
2. Swing the meter downward and push the bottom part of the meter until you hear an
audible click and the meter locks in place.
Removing the PM5563
1. Insert a flat-tip screwdriver into the DIN release clip. Pull down the clip until you hear
an audible click and the DIN clip is unlocked.
2. Swing the meter out and upwards to remove the meter.
TS35
35 mm
7.5 mm
CLICK
CLICK