Filter
Top Products
68 HRB1684301-01
Chapter 7—Viewing meter data PowerLogic™ PM5500 series user manual
Related topics
• See the StruxureWare Power Monitoring Expert online help for instructions on how
to add your meter into its system for data collection and analysis.
• StruxureWare Power Monitoring Expert user documentation is available in PDF
format and can be downloaded from www.schneider-electric.com.
PowerSCADA Expert
StruxureWare™ PowerSCADA Expert is a complete real-time monitoring and control
solution for large facility and critical infrastructure operations. It communicates with your
meter for data acquisition and real-time control.
You can use PowerSCADA Expert for:
• System supervision and alarm management
• Real-time and historical trending, event logging and waveform capture
• PC-based custom alarms
Related topics
• See the StruxureWare PowerSCADA Expert online help for instructions on how to
add your meter into its system for data collection and analysis.
• StruxureWare PowerSCADA Expert user documentation is available in PDF format
and can be downloaded from www.schneider-electric.com.
Modbus command interface
Most of the meter’s real-time and logged data, as well as basic configuration and setup
of meter features, can be accessed and programmed using a Modbus command
interface and the meter’s Modbus register list. This is an advanced procedure that
should only be performed by users with advanced knowledge of Modbus, their meter,
and the power system being monitored. For further information on the Modbus
command interface, contact Technical Support.
Related topics
• See your meter’s Modbus register list at www.schneider-electric.com for the
Modbus mapping information and basic instructions on command interface.