Filter
Top Products
18 HRB1684301-01
Chapter 2—Hardware reference PowerLogic™ PM5500 series user manual
Mounting the integrated display model (PM5560, PM5561)
The meter is designed to be mounted inside a 1/4-DIN panel cutout.
1. Inspect the gasket (installed around the perimeter of the front display) and make
sure it is secured properly and not damaged.
2. Insert the meter through the mounting hole.
3. Line up the tabs of the retainer clips with the slots on either side of the meter. While
holding the retainers at a slight angle, push the retainers in and forward to position
them in place. In situations where the spacing between meters is tight, use a flat-
head screwdriver with a long, narrow shaft to help secure the clips.
4. Push the middle of the clip assembly to lock the retainer in place and secure the
meter.
(3.62)
+0.03
92.0
+0.8
< 6.4
(< 0.25)
92.0
+0.8
(3.62)
+0.03
mm
(in)
CLICK
CLICK
CLAC
K
CLACK