Filter
Top Products
PowerLogic™ PM5500 series user manual Chapter 3—Front panel display and meter setup
HRB1684301-01 45
1. Navigate to Maint > Setup.
2. Enter the setup password (default is “0”), then press OK.
3. Navigate to Clock.
4. Move the cursor to point to the parameter you want to modify, then press Edit.
5. Modify the parameter as required, then press OK.
6. Move the cursor to point to the next parameter you want to modify, press Edit,
make your changes, then press OK.
7. Press to exit. Press Yes to save your changes.
Related topics
• See “Setting up regional settings” on page 42 for instructions on changing the
format of the displayed date and time.
• To configure the clock using ION Setup, see the “PM5500 series” topic in the
ION Setup online help or in the ION Setup device configuration guide, available for
download at www.schneider-electric.com.
• See “TDD calculation” on page 122 for details on how the meter calculates TDD.
Setting up the alarm / energy pulsing LED
The meter’s LED can be configured for alarm indication or energy pulsing.
Related topics
• See “LED alarm indicator” on page 101 for details on setting up the LED for alarms.
• See “Energy pulsing” on page 81 for details on setting up the LED for energy pulse
counting.
Clock setup menu tree
Clock setup parameters
Parameter Display format Description
Date
DD/MM/YY, MM/DD/YY,
YY/MM/DD
Set the current date using the format displayed
on screen, where DD = day, MM = month and
YY = year.
Time
HH:MM:SS (24 hour format),
HH:MM:SS AM or PM
Use the 24-hour format to set the current time in
UTC (GMT).
Meter Time GMT, Local
Select GMT to display the current time in UTC
(Greenwich Mean Time zone).
To display local time, set this parameter to
Local, then use GMT Offset (h) to display local
time in the proper time zone.
GMT Offset (h)
1
1
Currently supports whole integers only.
+/- HH.0
Available only when Meter Time is set to Local,
use this to display the local time relative to GMT.
Set the sign to plus (+) if local time is ahead of
GMT, or minus (-) if local time is behind GMT.
Maint
Reset
Setup
Comm
Alarm
I/O
HMI
Clock
Meter