Filter
Top Products
Reference Manual
00809-0100-4021, Rev DA
November 2004
Rosemount 3144P
4-30
FOUNDATION Fieldbus
All other custom tags that are entered must be: numbers 0 - 9, letters A - Z,
and/or spaces.
The following are the standard temperature units codes displayed on the
LCD:
All other custom units that are entered must be: numbers 0 - 9, letters A - Z,
and/or spaces.
If the value of the process variable displayed has a bad or uncertain status the
following is shown:
When power is first applied, the LCD will display the following:
If the device goes from “Auto” mode to Out-of-Service (OOS) mode, the LCD
will display the following:
Units LCD bottom line
Degrees C “DEG C”
Degrees F “DEG F”
Degrees K “DEG K”
Degrees R “DEG R”
Ohms “OHMS”
Millivolts “MV”
Percent (%) Uses the percent annunciator
Status LCD bottom line
Bad “BAD”
Uncertain “UNCTN”
LCD top line LCD bottom line
“3144” blank
LCD top line LCD bottom line
“OOS” blank