Filter
Top Products
Reference Manual
00809-0100-4021, Rev DA
November 2004
Rosemount 3144P
A-14
ORDERING INFORMATION
Model Product Description
3144P Temperature Transmitter
Code
Transmitter Housing Type/Conduit Entry
D1 Field Mount Housing (Dual-Compartment), Aluminum,
1
/2–14 NPT
D2 Field Mount Housing (Dual-Compartment), Aluminum, M20 x 1.5 (CM20)
D3 Field Mount Housing (Dual-Compartment), Aluminum, PG 13.5 (PG11)
D4 Field Mount Housing (Dual-Compartment), Aluminum, JIS G
1
/2
D5 Field Mount Housing (Dual-Compartment), Stainless Steel,
1
/2–14 NPT
D6 Field Mount Housing (Dual-Compartment), Stainless Steel, M20 x 1.5 (CM20)
D7 Field Mount Housing (Dual-Compartment), Stainless Steel, PG 13.5 (PG11)
D8 Field Mount Housing (Dual-Compartment), Stainless Steel, JIS G
1
/2
Code Output
A 4-20 mA with Digital Signal based on HART protocol
B 4 – 20 mA Safety Certified with digital signal based on HART protocol
F FOUNDATION fieldbus digital signal (includes 3 AI function blocks and Backup Link Active Scheduler)
Code Measurement Type Configuration
1 Single-Sensor Input
2 Dual-Sensor Input
Code Product Certifications
NA No Approval
E5 FM explosion-proof and non incendive approval
I5
(1)
FM intrinsic safety and non-incendive (includes standard I.S. and FISCO for fieldbus units)
K5
(1)
FM intrinsic safety, non-incendive, and explosion-proof combination (includes standard I.S. and FISCO for fieldbus units)
KB
(1)
FM and CSA intrinsic safety, explosion-proof & non-incendive combination (includes standard IS and FISCO for fieldbus units)
I6
(1)
CSA intrinsic safety and FISCO Division 2 (includes standard IS and FISCO for fieldbus units)
K6
(1)
CSA intrinsic safety, FISCO Division 2, and explosion-proof combination (includes standard IS and FISCO for fieldbus units)
E1 ATEX flameproof approval
N1 ATEX type n approval
I1
(1)
ATEX intrinsic safety (includes standard I.S. and FISCO for fieldbus units)
K1
(1)
ATEX intrinsic safety, flameproof, and Type n approval combination (includes standard IS and FISCO for fieldbus units)
ND ATEX dust ignition proof approval
KA
(1)
ATEX/CSA intrinsic safety and explosion-proof combination (includes standard I.S. and FISCO for fieldbus units.)
E7 SAA flameproof approval
N7 SAA type n approval
I7
(1)(3)
SAA intrinsic safety – HART only
K7
(1)(2)
SAA intrinsic safety, flameproof, and type n combination (includes standard IS & FISCO for FF)–consult for fieldbus availability
I2
(3)
CEPEL intrinsic safety approval
E4
(3)
JIS flameproof approval (requires either housing code D4 or D8)